How to select?
Window
conditioner -
this is the monoblock conditioner, mounted into the window
aperture or the thin wall, in this case the aft body must leave
outside.
It is completely completed and charged by refrigerant.
Some models have a panel D/U. Merits of this type are low prices
for
and possibility of the drawing of air worked out in the
accommodation. To the deficiencies can be attributed the
sufficiently high level of noise and some of the inconveniences,
caused by installation into the window frame, in particular, the
decrease of daylight illumination. In this case qualitative
installation into the Thermo panes is problematic. This conditioner
it is expedient to use when in the accommodation according to one
or the other reasons the installation of more functional Split-
systems is impossible.
Mobile
conditioners - this is the class of lungs, movable
conditioners, which do not require special installation. When
desired it is possible to rapidly move them into any accommodation.
Mobile conditioners occur two it is specific: mobile Split-
systems and mobile monoblocks.
In the first case they resemble
usual Split- systems, with exception of the fact that the
compressor in them is located in the internal block, which is
connected with the external flexible conduit. In this case
external block is weighed for the window.
The second form is
the monoblock, connected with the street with the flexible hose,
through which outside is moved away warm air. As a rule is
built-in "TEN" for the work to the
heating.
A drawback in the "cell phones" is the increased
noisiness and the need for the pereodicheskogo discharge of the
capacity, in which is accumulated the condensate. Furthermore the
power of such conditioners is not great. They be suitable for
those, who frequently change dwelling.
Split-
system the most popular type of conditioner. They consist of
two blocks - internal and external. The noisiest part of the
conditioner - compressor is located in the external block, in
connection with this the level of noise of contemporary models
does not exceed 40 dB both blocks of the conditioner they are
connected by copper tubes, on which circulates the refrigerant.
Besides the low level of noise they possess an also whole series
of the merits, the main thing among which - the variety of the
types of internal blocks. The latter are wall, cassette, outdoor-
ceiling, column, channel.
Are most common
internally wall type blocks. More than half of
all sales of Split- systems is required on them. Is connected this
with the fact that they are universal and be suitable for the
absolute majority of accommodations in the most popular range of
power and furthermore they are cheaper than the Split- system of
other types.
cassette
type Split- systems are intended for the installation into
the suspension ceiling. As a rule the power of these conditioners
is sufficiently great, which makes it possible to use them for the
accommodations of large size.
Outdoor-ceiling conditioner is established under the ceiling or on the
floor close to the wall (hence name) Usually it is used in the
large accommodations, where there is no suspension
ceiling.
Column
conditioner is used for the large accommodations when to
undesirably touch walls and ceiling (museums, theatres, the
monuments of architecture, etc.).
Channel
conditioner just as cassette is concealed type Split- system.
It is used, most frequently immediately for several accommodations.
Internal block is fastened after the sewed ceiling or in the
auxiliary accommodation. Processed air is heard on the network of
the air ducts, placed in the ceiling or interwall space.
This type of conditioners is capable to also achieve inflow and
drawing of
air.
